-| Take Down | - Han - Yin Exim
Take
Down
Step 1
Follow reverse step of the tent set-up instructions. Unzip door and window.
Remove any sharp objects inside the tent. Do not remove the stakes from the
ground by pulling the stake loops. This may cause a tear out of the seam to
the stake loops. Remove the stakes, guy ropes, rainfly and divider from the
tent. Remove and disassemble the shock-corded pole for the rainfly.
Step 2
To collapse insta-set poles, release the upper joint by pushing down the upper
part of the upper joint and sliding down the lower collar of the upper joint
simultaneously. If the lower collar does not slide down easily, push down the
upper part of the upper joint a little more. While releasing the upper joint,
another person may help by holding the center hub in raised position.
Unlocking the upper joint allows the lower joint to collapse Automatically.
(If the lower joint sticks into locked position While collapsing the tent, pick
up the upper pole section of the lower joint and shake gently until lock releases.)
Unlocking the upper joint allows the lower joint to collapse Inwardly and the
upper pole section of the lower joint to fall down over the lower pole section
of the lower joint. Repeat this step until the entire the tent is collapsed.
Step 3
Align the tent assembly like a star, keeping the tent frames radiating from
the center hub. To roll the tent, gather together the poles like an umbrella
assembly, tie together the end of the poles by Velcro strap and trim the tent
fabric like figure of the tent set-up instructions. Lay the tent on the ground
and press any trapped air inside the tent. Fold up the tent fabric over the
poles and roll the tent to it’s minimum size.
NOTE : If the poles are not in correct position, do not force them but unfold
and realign the poles before proceeding.
Step 4 Pack the tent into carrybag together with the shock-corded pole,
divider, rainfly, accessories and instruction sheet.